IV Cannulas
A precision-manufactured pen-type cannula platform designed to support consistent peripheral vascular access in professional healthcare settings.
IV Cannulas: built as a system, not a part.
Reliable vascular access depends on product consistency at a very small scale. Kyoto's IV cannula platform is built around controlled catheter, hub and needle geometry, careful assembly and a manufacturing system designed to connect production with in-house quality review. The pen-type range covers four gauges for adult, paediatric and fragile-vein applications.
Four gauges, standard colour coding
18G, 20G, 22G and 24G, colour-coded to the international convention so clinicians can identify size at a glance.
Controlled component geometry
Catheter, hub and needle components are manufactured to support consistent fit and function across production lots. Individual feature claims will be confirmed against the approved design.
Cleanroom-controlled assembly
Assembly takes place within Kyoto's controlled medical-device manufacturing environment.
In-process and laboratory quality
Checks are placed within the production flow and supported by in-house laboratory review.
Configurations currently manufactured.
As supplied by the Kyoto product team. Dimensions in inches with millimetre equivalents.
| Product | Gauge | Colour code | Catheter length |
|---|---|---|---|
| IV Cannula, Pen Type | 18G | Green | 1¼" (32 mm) |
| IV Cannula, Pen Type | 20G | Pink | 1¼" (32 mm) |
| IV Cannula, Pen Type | 22G | Blue | 1" (25 mm) |
| IV Cannula, Pen Type | 24G | Yellow | ¾" (19 mm) |
- Sterility state
- Stated in datasheet / IFU
- Sterilization method
- Stated in datasheet / IFU
- Primary packaging
- Stated in datasheet / IFU
- Shelf life
- Stated in datasheet / IFU
- Applicable standard(s)
- Stated in datasheet / IFU
- Registration by market
- Stated in datasheet / IFU
Product specifications are subject to the approved product design and may vary by market. Refer to the current datasheet and Instructions for Use.
Documentation for tender and qualification.
Datasheets and IFUs are issued per revision. Regulatory documents are provided on request by market.
- On request
Product datasheet
Current revision issued on request.
- On request
Instructions for Use
Approved IFU for the product and market.
- Gated
Regulatory / registration documents
Provided by product and destination market.
- On request
Packaging specification
Primary and secondary packaging and case configuration.
Frequently asked.
Four pen-type configurations: 18G × 1¼" (32 mm), 20G × 1¼" (32 mm), 22G × 1" (25 mm) and 24G × ¾" (19 mm).
Cannula hubs follow the international colour convention — green for 18G, pink for 20G, blue for 22G and yellow for 24G — so size can be confirmed visually before insertion.
Required gauges, expected annual volume, destination markets, packaging requirements and any tender documentation needs. The product requirement form is structured around these inputs.
Auto-Disable Syringes
Designed for injection programs where preventing reuse is a critical safety requirement. Molded components, precision as…
Disposable Syringes
Single-use syringes with a secure Luer-lock needle connection, for general injection, aspiration and preparation workflo…
IV Infusion Sets
Infusion administration sets for gravity delivery of fluids, supplied with a Luer-slip connector and 21G × 1½" needle, w…
Evaluating IV cannula supply?
Share the required gauges, annual volume, destination markets and packaging requirements. Our team routes your request to the appropriate technical and commercial contacts.